67-70 UCA Drop Template
Don't forget to order:
This is a steel templates for doing the UCA drop on 1967 through 1970 Mustangs. This template is made of 1/16" plate steel and is CNC cut for accuracy. It bolts into the shock tower in the stock A-arm location and allows you to drill two pilot holes in the improved suspension location. The template is then removed and the pilot holes can then be enlarged to accept the UCA bolts.
If you are ordering this template for a car other than a Mustang, before ordering please measure the distance between the UCA studs on your car. A 3.75" measurement requires the 64-66 template and a 4.75" measurement requires the 67-70 template.
In order to properly perform the UCA drop a 17/32" drill bit is required to correctly size the new holes. This bits can be hard to find locally and often times they are expensive. If you need a bit I sell them individually or they can be purchased with a template as a "kit". Please see "suggested parts" below if you ate needing a 17/32" drill bit
67-70 UCA Drop Template
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.