Description

Under-Dash hydraulics clutch pedal kit converts your existing manual clutch pedal or Automatic pedals into a hydraulic system with an easy bolt-in install. Our master cylinder is part of our pedal assembly with nothing to adjust the bolt in and you’re ready to go.

Unlike other complicated units with separate master cylinder install, pedal location, and cumbersome linkages, ours saves time, with no modifications or adjustments.

Don’t forget to buy a hydraulic throw-out bearing and a steel spacer plate if you are installing a T5, T56, or TKO

Installation instructions can be found here: https://youtu.be/vYnAnXwVD-A

Included in your under-dash kit:

•Braided line with 3 AN fittings for connection from master cylinder to Hydraulic throwout bearing.

•custom designed bolt in pedal assembly w/ rubber pedal pad

•Main shaft assembly with 4 nylon bushings

•billet reservoir /with reservoir line

•All grade 8 fasteners included

Does not include

•Dot 4 or Dot 3 Brake fluid conventional NOTE: DO NOT USE HIGH TEMP OR SILICONE FLUID.

NOTE : Your original under dash carrier is not included.  Instructional photos for reference onl