Description

FOR STANDARD BRAKES VEHICLES WITH ORIGINAL STANDARD BRAKES. (See our other kit for Power Brakes) This hydraulic clutch pedal kit converts your existing manual clutch pedal or Automatic pedals into a hydraulics system with an easy bolt in install.  Our master cylinder is part of our pedal assembly with nothing to adjust bolt in and your ready to go.

unlike other complicated units with separate master cylinder install, location, and cumbersome linkages, ours saves time, with no modifications or adjustments.

Don’t forget to buy a hydraulic throw-out bearing and a steel spacer plate if you are installing a T5, T56, or TKO

Installation instructions can be found here: https://youtu.be/vYnAnXwVD-A

Included in your under dash kit: 

•custom designed bolt in pedal assembly w/ rubber pedal pad

•Braided line with 3 AN fittings for connection from master cylinder to Hydraulic throwout bearing.

•Main shaft assembly with 4 nylon bushings

•billet reservoir /with reservoir line

•All grade 8 fasteners included

Does not include

•Dot 4 or Dot 3 Brake fluid  NOTE: DO NOT USE HIGH TEMP FLUID OR SILICONE FLUID.

NOTE : Your original under dash carrier is not included.  Instructional photos for reference only.