65-66 Mustang Power Brake Upgrade with All Wheel Disc Brakes - MustangSteve

65-66 Mustang Power Brake Upgrade with All Wheel Disc Brakes


Power Brake Upgrade for a 1965/1966 Mustang with All Wheel Disc Brake

  • This power brake upgrade uses a Fox Body Booster with a 1″ bore master cylinder for FRONT DISC brakes.
  • The kit does require you to modify the pedal support and stock brake pedal.
  • Ports on the driver fender side of the master cylinder.
  • This kit can be used for manual (cars with clutch cable conversion) or automatic transmissions.
  • New style of power brake light switch
  • Adjustable proportioning valve
  • All wheel disc brake master cylinder
  • The kit comes with instructions


Frequently Asked Questions:

Will it fit my 4 wheel disc brakes?
The kit fits ANY TYPE or combination of drum or disc brakes. The instructions specify what master cylinder to use. Also fits any original 65-73 master cylinder.

What about Falcon and Ranchero?
Yes, with a bit of extra work it can be made to fit other applications, although not quite as easily as the 65-66. Extra work means an extra piece must be welded to the brake pedal in order to peroperly relocate the pedal pin. 60-63 Falcon must use original style master cylinder due to shock towers, or use Shelby style export brace with tandem master. 67-70 Mustang / Cougar – use the 67-70 Mustang/Cougar booster and pedal now offered by MustangSteve.

Will the tandem master cylinder clear the shock tower?
What about clearing an export brace? Yes, it clears the tower by about 2 inches, and is not even close to the export brace. (Except on early Falcons and Comets, where the single piston master fits easily, but the dual piston requires use of Shelby style export brace.)

Will it fit a 351W with Heddman headers?
Yes, it clears with no problems whatsoever. You may have to remove the header to get the booster in place, but clear fine once bolted in.

Why will it not fit my car with original manual transmission?
The clutch actuation rod comes through the firewall in the exact spot where one of the booster studs must attach. if you are using a T5 or Tremec tranny with a MustangSteve cable actuated clutch, it will work fine.

No Fitment Found

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)