Install 1994-2004 Cobra 13″ Front Brakes on your MustangII or Heidt’s Drop Disc Brake Spindles


Available on backorder



BRACKET KITS for MUSTANG II or Heidt’s 2″ Drop Disc Brake SPINDLES
Note:  Use V8 drum brake HUBS from 65-73 Mustang or mid size Ford/Mercury.
Use Mustang II bearings and seals

Front Caliper Mounting Kit Uses:
1994-2004 Cobra 13″ front brakes – 17″ WHEELS ARE REQUIRED

Custom Caliper Mounting Brackets
Grade 8 fitted bracket bolt kit
Caliper mounting bolts w/flanged head
Rotor hub-centric ring (positively centers rotor on hub)

American Racing Torque Thrust II 17” will not clear Cobra or GT calipers.
Due to Rod & Custom spindles having a proprietary brake bolt pattern, stock Mustang II brakes will not bolt up.  Since the MustangSteve brackets are designed to fit the stock Mustang II brake bolt pattern the MustangSteve brackets can be used but will require modification to match R&C non-stock bolt pattern.  If you plan to use MustangSteve brackets notify us before ordering.  We will leave the welded tab on the bracket un-welded so you can relocate it and weld it to fit your spindles.  You may also be required to relocate a drilled hole also.

94-04 Cobra hoses:  Note they have a 3/8” SAE inverted flare on one hose and 7/16” inverted flare thread on the opposite side. (On frame end of the hose)  Depending on the year of the calipers, the banjo bolts can be fine or coarse thread.

Fits 64-1/2 to 73 Mustangs (and other Fords using similar spindle)    17″ wheels required

These items are considered race only, or off-road.  Improper installation or any type of brake failure can cause serious injury or death.  Car owner assumes all risk of
failure of any kind upon installing these brake parts.

MustangSteve is not responsible for any consequences should a failure of any kind occur.  These parts must be installed by someone who is competent in installing and
modifying automobile brake systems.