Install 1994-2004 Cobra 11.65″ Rear Brakes on your Classic Ford (Small Bearing)

$245.00

2 in stock

Description

Rear Caliper Mounting Kit – Small Bearing
1994-2004 Cobra 11.65″ rear brakes
Note:  All 65-73 Mustang 8″ & 9″ rear ends were small bearing.  Versailles 9″ uses large bearing.

15″ wheels required (Fits Most 15″ Wheels) CUSTOMER MUST VERIFY FITTING

Click Here for Installation Instructions

American Racing Torque Thrust II 17” will not clear Cobra or GT calipers.

Includes:
Caliper Mounting Brackets
Brackets replace bearing retainer and bolt to housing w/existing bolts
Rotor hub-centric ring (positively centers rotor on hub)
Grade 8 bracket bolt kit
Caliper mounting bolts w/ flanged head
Fits 8″ and some 9″ rear ends
2.836″ diameter bearing with 3.375″ x 2.00″ bolt pattern with 3/8″ bolt holes

(Brake calipers and rotors in Picture are not included – shown for reference only).

 

BRACKET KITS for 8″ or 9″ Ford Rear Ends.

Note:  All 65-73 Mustang 8″ & 9″ rear ends were small bearing. Versailles 9″ uses large bearing.

15″ wheels required (Fits Most 15″ Wheels) CUSTOMER MUST VERIFY FITTING.

DISCLAIMER

These items are considered race only, or off-road.  Improper installation or any type of brake failure can cause serious injury or death.  Car owner assumes all risk of
failure of any kind upon installing these brake parts.

MustangSteve is not responsible for any consequences should a failure of any kind occur.  These parts must be installed by someone who is competent in installing and
modifying automobile brake systems.