Front Caliper Mounting Kit Uses:
2005-2010 Mustang GT 12.5″ front brakes – 17″ wheels required
2011-2014 Mustang V6 12.5″ front brakes – 17″ wheels required
2011-2014 Mustang GT 13.2″ front brakes – Use of the 13.2” brakes may require fitting of 18” wheels to clear the larger diameter rotor/caliper assembly. Some 17” wheels may clear, but owner is responsible to verify fitting of wheels on the larger brakes.
Custom Caliper Mounting Brackets
Grade 8 fitted bracket bolt kit
Caliper mounting bolts w/flanged head
Rotor hub-centric ring (positively centers rotor on hub)
American Racing Torque Thrust II 17” will not clear Cobra or GT calipers.
BRACKET KITS for DRUM BRAKE SPINDLES & HUBS on 65-73 Ford Mustang & Cougar
NOTE: 65-67 Disc brake spindles are same as drum brake spindle. Must use V8 drum hub.
Will NOT fit Granada or 68-73 disc brake spindles.
This kit will allow installation of late model 2005-2014 Mustang GT 12.5″ or 13.2″ rotors and calipers onto existing DRUM BRAKE hubs and spindles.
Removal of spindles from the car is not necessary.
Front end alignment is not necessary.
Brackets bolt to original drum brake spindles, utilizing drum brake hubs after removal of hub
GT rotors fit snug to the existing stud shoulders on the existing drum brake spindles
GT calipers bolt to the brackets.
Vehicle’s TRACK WIDTH is not changed. Normal wheel backspacing is maintained.
FRONT CALIPER BRACKETS ARE CAD DESIGNED AND CUT ON STATE-OF-THE-ART LASER MACHINES.
Brackets are made out of 3/8″ steel plate.
These items are considered race only, or off-road. Improper installation or any type of brake failure can cause serious injury or death. Car owner assumes all risk of
failure of any kind upon installing these brake parts.
MustangSteve is not responsible for any consequences should a failure of any kind occur. These parts must be installed by someone who is competent in installing and
modifying automobile brake systems.