Description

Rear Caliper Mounting Kit – large bearing
2005-2014 Mustang (all) 11.75″ rear brakes
REQUIRES AT LEAST 16″ WHEELS

Includes:
Caliper Mounting Brackets
Brackets replace bearing retainer and bolt to housing w/existing bolts
Caliper mounting bolts w/ flanged head
Fits 9″ rear ends with large bearing.
3.150″ diameter bearing with 3.50″ x 2.375″ bolt pattern with 1/2″ bolt holes
3.150″ diameter bearing with late Ford bolt pattern with 3/8″ bolt holes

American Racing Torque Thrust II 17” will not clear Cobra or GT calipers.

Note:  All 65-73 Mustang 8″ & 9″ rear ends were small bearing.  Versailles 9″ uses large bearing.

BRACKET KITS for 8″ or 9″ Ford Rear Ends

Note:  All 65-73 Mustang 8″ & 9″ rear ends were small bearing. Versailles 9″ uses large bearing.

16″ wheels required

DISCLAIMER

These items are considered race only, or off-road.  Improper installation or any type of brake failure can cause serious injury or death.  Car owner assumes all risk of
failure of any kind upon installing these brake parts.

MustangSteve is not responsible for any consequences should a failure of any kind occur.  These parts must be installed by someone who is competent in installing and
modifying automobile brake systems.