Description

Rear Caliper Mounting Kit – small bearing
2005-2014 Mustang (all) 11.75″ rear brake
REQUIRES AT LEAST 16″ WHEELS

Note:  All 65-73 Mustang 8″ & 9″ rear ends were small bearing.  Versailles 9″ uses large bearing.

American Racing Torque Thrust II 17” will not clear Cobra or GT calipers.

Includes:
Caliper Mounting Brackets
Rotor hub-centric ring (positively centers rotor on hub)
Brackets replace bearing retainer and bolt to housing w/existing bolts
Caliper mounting bolts w/ flanged head
Fits 8″ and some 9″ rear ends
Also fits Mustang II 8″ rear ends
2.836″ diameter bearing with 3.375″ x 2.00″ bolt pattern with 3/8″ bolt holes

BRACKET KITS for 8″ or 9″ Ford Rear Ends

Note:  All 65-73 Mustang 8″ & 9″ rear ends were small bearing. Versailles 9″ uses large bearing.

16″ wheels required

DISCLAIMER

These items are considered race only, or off-road.  Improper installation or any type of brake failure can cause serious injury or death.  Car owner assumes all risk of
failure of any kind upon installing these brake parts.

MustangSteve is not responsible for any consequences should a failure of any kind occur.  These parts must be installed by someone who is competent in installing and
modifying automobile brake systems.