Bushing for 67-69 Mustang Tie Rods using 70-73 Mustang & Cougar Spindles

Tie Rod Bushings for 67-69 Mustang and Cougar

Fits 67-69 Mustang, Cougar, and most Fairlanes into 70-73 Mustang and Cougar spindles.

*Pricing is for ONE bushing.*

Instructions

Important Notes:

- If spindles use rotors thicker than 1", they are NOT Granada or Versailles spindles. Some LTD II and Cougar spindles from 1975-79 may look similar but will NOT fit Mustangs or Cougars from 1964-1/2 to 1973.

- All Granada and Versailles rotors are 0.875" thick, with a minimum thickness of 0.810".

Part Numbers:

- Lincoln Versailles Spindles (1977-80): Right: D7DY 3105A, Left: D7DY 3106A

- Granada/Monarch Spindles (1975-80): 5D7AA 275, 5D8AA 275

- Spindles with part numbers starting with C6 are typically 67-69 drum spindles, NOT 66 spindles.

Why You Need These Bushings:

65-66 Mustangs with V-8 and power steering have a unique driver-side outer tie rod. When installing disc brakes from Granada, Maverick, Versailles, or 70-73 Mustang or Cougar, a later model tie rod cannot replace the unique driver-side unit. Six-cylinder Mustangs have a smaller outer tie rod end that does not fit larger disc brake spindles. These adapter bushings allow easy installation of outer tie rods into the spindles without further modifications.

Compatibility:

These tie rod bushings also fit Falcons, Cougars, and other small Fords using similar-sized tie rods as the 65-69 Mustang.

Disclaimer:

This is a modification to your car's steering. MustangSteve is not responsible for any consequences from modifications using this product. The owner must determine suitability and ensure safe installation.