11.65" 1994-2004 Cobra Rear Brakes on your Classic Ford (Small Bearing)

Rear Caliper Mounting Kit - Small Bearing 1994-2004 Cobra 11.65" rear brakes

Note:  All 65-73 Mustang 8" & 9" rear ends were small bearing.  Versailles 9" uses large bearing. 15" wheels required (Fits Most 15" Wheels)

CUSTOMER MUST VERIFY FITTING

Click Here for Installation Instructions

American Racing Torque Thrust II 17” will require a thin spacer on FRONT Cobra or GT calipers.

Includes: Caliper Mounting Brackets Brackets replace bearing retainer and bolt to housing w/existing bolts Rotor hub-centric ring (positively centers rotor on hub) Grade 8 bracket bolt kit Caliper mounting bolts w/ flanged head Fits 8" and some 9" rear ends 2.836" diameter bearing with 3.375" x 2.00" bolt pattern with 3/8" bolt holes (Brake calipers and rotors in Picture are not included - shown for reference only).   BRACKET KITS for 8" or 9" Ford Rear Ends.

Note:  All 65-73 Mustang 8" & 9" rear ends were small bearing. Versailles 9" uses large bearing. 15" wheels required (Fits Most 15" Wheels)

CUSTOMER MUST VERIFY FITTING. DISCLAIMER These items are considered race only, or off-road.  Improper installation or any type of brake failure can cause serious injury or death.  Car owner assumes all risk of failure of any kind upon installing these brake parts. MustangSteve is not responsible for any consequences should a failure of any kind occur.  These parts must be installed by someone who is competent in installing and modifying automobile brake systems.