11.75" 2005-14 Mustang (S197) Rear Brakes on your Classic Ford (Small Bearing)

Rear Caliper Mounting Kit - small bearing 2005-2014 Mustang (all) 11.75" rear brake

REQUIRES AT LEAST 16" WHEELS

Note:  All 65-73 Mustang 8" & 9" rear ends were small bearing. 

Versailles 9" uses large bearing.

American Racing Torque Thrust II 17” will require a thin spacer on FRONT Cobra or GT calipers.

Includes:

Caliper Mounting Brackets

Rotor hub-centric ring (positively centers rotor on hub)

Brackets replace bearing retainer and bolt to housing w/existing bolts

Caliper mounting bolts w/ flanged head Fits 8" and some 9" rear ends

Instructions can be found here

Also fits Mustang II 8" rear ends 2.836" diameter bearing with 3.375" x 2.00" bolt pattern with 3/8" bolt holes   BRACKET KITS for 8" or 9" Ford Rear Ends Note:  All 65-73 Mustang 8" & 9" rear ends were small bearing. Versailles 9" uses large bearing.

16" wheels required

DISCLAIMER These items are considered race only, or off-road.  Improper installation or any type of brake failure can cause serious injury or death.  Car owner assumes all risk of failure of any kind upon installing these brake parts. MustangSteve is not responsible for any consequences should a failure of any kind occur.  These parts must be installed by someone who is competent in installing and modifying automobile brake systems.