Master Kit for 70 Mustang Cable Clutch System for Power Brakes
Don't forget to order
Couldn't load pickup availability
Pickup available at MS Warehouse
Usually ready in 24 hoursMaster Kit for 70 Mustang Cable Clutch System for Power Brakes
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Description
MASTER KIT with Manual Brakes for 65-66 Mustang (Adjustable)
Note: Can be modified to work with long tube headers.
Using with Toploader or T10 Transmission:
This kit is designed for T-5 or Tremec conversions with a cable clutch. For original Mustang standard transmissions, some fabrication is required. You’ll need to install a cable-type release arm and a new pivot bolt (fulcrum) in the bellhousing. [Click Here for Instructions]
Includes:
- Pedal support with ball bearings
- Clutch & brake pedal
- Quadrant installed on pedal
- Adjustable cable stop
- Firewall brace
- Cable
- Full instructions
If you have used pedals or pedal supports from 65-70 Mustangs or Cougars to sell, email info@mustangsteve.com.
Fabrication Details:
For the original bellhousing, install a Mr. Gasket replacement fulcrum bolt and a Ford release arm from an '87-'93 5.0 Mustang with a T5. An aluminum plate must be welded into the bellhousing, and a 1/2" hole threaded for the new fulcrum bolt. A cable housing stop must also be fabricated for outside the bellhousing.